INDUSTRIAL CLEANING CHEMICALS
Acid Cleaner Heavy Acidic Rust Remover
It is used in the cleaning of medium and heavy rusts for metals by mixing with water at a ratio of 1/1 to 1/5. After the application, it is rinsed with plenty of water and metal protective oil or paint is applied.
Concrete Floor Cleaner
It is especially effective in cleaning heavy oils formed over time on floors such as concrete, tile tile, cast tile. If it is used for floor cleaning before paint and coating to be applied to the floor, it ensures better adhesion of the paint and coating to the floor. It is diluted with water between 1/1 and 1/8 according to the density of the oil on the floor. Diluted FNX-BTN 14 is applied on oily areas. The product is expected to react with the oil on the floor and remove the oil. It is then rinsed with water. In very old and oily areas, oil may vomit from the floor again. In such cases, repeat the above steps.
Mixer Truck Concrete Mixer Cleaner
Concrete out, which is specially formulated for cleaning the concrete residues formed in concrete mixer vehicles and facilities, eats the concrete residues at micron level and removes them from the surface. It is diluted with water at a ratio of 1/1 to 1/5.
Metal Surface Preparer
It removes rust and oil on metal surfaces in just one operation, cleans the metal and prepares it for coating and painting. It saves time and manpower as it cleans quickly. Cleans oil, oxide and rust on aluminum, iron, copper, steel and brass. FNX-SURFACE 20 is used with a brush, cloth or dipping method by diluting the oil on the metal with 1/3 to 1/7 water, depending on the rust condition.
Concentrated Industrial Skin Cleansing Liquid
FNX-MIYA, which removes grease and other dense dirt without damaging the skin, is an excellent cleaning expert that protects the skin. Since it contains lanolin, it does not leave the skin oil-free. It does not irritate. It cleans quickly. It is economical. It is used for whole body cleaning. Rub the skin with FNX--MIYA without water and wash with water. It is used in liquid soap dispensers by diluting with water at a ratio of 1/7 for body cleaning, 1/4 to 1/5 for cleaning light dirt, and 1/1 to 1/3 for cleaning heavy dirt.
Mineral Clean Extra Al and Co Coated Surface Cleaner
It is a product used to clean soot, soot, residue and stains on exteriors containing aluminum and cobalt. It is a concentrated product. It can be used by diluting with water between 1/5 and 1/10 according to the density of the dirt. It can be applied by wiping and spraying methods.
Foaming Hand Soap
Its ready and soft foam saves water and time while cleaning your hands, thanks to the natural moisturizers it contains. It is suitable for skin pH. Thanks to its alkali-free formula, it protects the skin, keeps it healthy and does not irritate. Apply a small amount to wet skin, rub hands and rinse.
MORE
Please kindly contact us if you need other chemicals. Just let us know which type of solvents or chemicals you need, and we can supply them.
